Split Rail Fence in Norman, OK
Ironclad Fence Norman builds split rail fences across Norman, OK and Cleveland County: rustic two- and three-rail fences with rails fitted into mortised posts, for property lines, driveways, front yards, gardens and acreage, with welded wire backing when you need to keep pets in. Split rail marks a line without blocking the view and follows rolling ground smoothly. As a fence company in Norman, OK, we set the posts deep so they stay plumb in our clay. Every project starts with a free on-site estimate and a written, itemized quote.
Why us
Why Choose Us for Split Rail Fences in Norman, OK
Split rail looks simple, which makes leaning posts and drooping rails easy to spot. We build it to stay straight.
-
Posts That Stay Plumb
Split rail has no rails to brace the posts, so we set them deep in concrete or tamped gravel to suit the soil.
-
Smooth Over Rolling Ground
We fit each section to the grade so the fence flows with the land instead of stepping.
-
Pet-Safe When You Need It
Welded wire backing, stapled tight on the inside of the rails, keeps dogs in without hiding the fence.
-
Rot-Resistant Wood
Ground-contact posts and durable rails, so the parts in the soil last as long as the parts above it.
Services
Split Rail Fence Services in Norman, OK
Need privacy instead? See wood fence installation. Fencing livestock? See ranch and farm fencing.
-
Property Line Split Rail
Two- and three-rail fences that mark a boundary on large lots and acreage.
-
Driveway & Entrance Split Rail
Rustic runs along driveways and at entrances, often paired with stone or brick features.
-
Front Yard Split Rail
Low, open fences that define a front yard under Norman’s 4-foot front limit.
-
Split Rail With Wire
Welded wire backing for dogs and gardens. More on dog fences.
-
Garden & Landscape Fencing
Short runs that frame gardens, beds and play areas without closing them in.
-
Split Rail Repair
Replacement rails and posts, and resetting posts that have leaned.
Choose
Two-Rail, Three-Rail or With Wire?
The number of rails and whether you add wire decide what a split rail fence can do.
| Option | Typical height | Best for |
|---|---|---|
| Two-rail | About 3 ft | Marking property lines, lining driveways, landscaping |
| Three-rail | About 4 ft | Defining a yard, a fuller look, holding wire mesh |
| Three-rail with wire | About 4 ft | Keeping dogs in and rabbits out of gardens |
All three stay under Norman’s typical 4-foot front-yard limit, which is why split rail is popular out front.
Cost
What Affects the Cost of a Split Rail Fence?
Split rail is one of the most economical ways to mark a long line. Your written quote lists each of these as its own line.
Get a free split rail estimate- Length
- Total footage, usually long on acreage.
- Rails
- Two or three rails per section.
- Wire backing
- Welded wire mesh, and burying it for diggers.
- Gates
- Walk and drive gates to match.
- Terrain and removal
- Rolling ground, brush, access and removing an old fence.
Timeline
How Long Does a Split Rail Fence Take?
Split rail goes up quickly: posts are set and rails slide in, with no boards to hang.
- From your call to the on-site estimate, typically
- 1–3 days
- For in-stock posts, rails and wire
- 0–5 days
- To build a typical residential split rail fence
- 1–3 days
- From request to finished fence for most homes
- 1–3 weeks
Long acreage runs take longer, and wet clay can delay digging after heavy rain.
Process
Our 4-Step Split Rail Fence Process
-
1. Estimate & Layout
We walk the line, mark gates and talk through rails and wire, then send a written, itemized quote.
-
2. Locates & Approvals
We call OKIE811 and check City of Norman and HOA rules for front-yard fences.
-
3. Posts & Rails
We set mortised posts deep, then fit the rails section by section to follow the ground.
-
4. Wire & Walkthrough
We add wire backing and gates if needed, then walk the fence with you.
Questions
Split Rail Fence FAQ — Norman, OK
Will a split rail fence keep my dog in?
Not on its own: the rails are too far apart. Adding welded wire mesh along the inside of the rails turns a split rail fence into a pet-safe fence while keeping the open, rustic look. Diggers may also need the bottom of the wire buried.
Two rails or three rails?
Two-rail fences are about 3 feet tall and mostly mark a boundary or line a driveway. Three-rail fences are about 4 feet tall, look fuller and hold wire mesh better, so they're the usual choice when the fence needs to contain pets or define a yard.
How are split rail posts set?
Split rail posts have slots, called mortises, that the rails slide into, so there are no nails or screws. We set the posts deep, in concrete or tamped gravel depending on the soil and drainage, so they stay plumb in Norman's shifting clay.
Can split rail fence follow hills?
Yes, very well. Because the rails sit loosely in the mortises, each section can angle up and down with the ground, so a split rail fence follows rolling land smoothly without stair steps.
Can I put a split rail fence in my front yard in Norman?
Usually, yes. Front-yard fences forward of the setback line must be under 4 feet tall in Norman, and two- and three-rail split rail fences are typically under that. Check your HOA too; many allow split rail where they don't allow solid fences.
Does a split rail fence need maintenance?
Very little. Split rail is meant to weather naturally. Check for rails that have slipped out of their mortises after storms or bumps from mowers, and replace any rail or post that rots. Treated or naturally durable wood lasts longest.
What is split rail fence made of?
Rails are split along the grain from logs, which gives them their rough, rustic faces, and the posts are round or split with mortises cut through. We use rot-resistant or pressure-treated wood, with ground-contact posts for the parts that sit in the soil.
Free estimate
Get a Free Split Rail Fence Estimate
Tell us roughly how much fence you need, two or three rails, and whether you need wire for pets. We’ll call to set a time to look, then send a written, itemized quote.