Fence Repair in Norman, OK
Ironclad Fence Norman repairs wood, vinyl, chain link and ornamental steel fences and gates across Norman, OK and Cleveland County. As a Norman fence company that also builds new fences, we fix the cause, not just the broken board: we replace failed posts with galvanized steel posts set in concrete below the frost line, straighten leaning fence lines, rebuild storm-damaged sections and rehang gates that sag or drag. Every repair starts with a free on-site look and a written, itemized quote that tells you plainly whether a repair or a replacement is the better value.
Why us
Why Choose Us for Fence Repair in Norman, OK
Norman’s wind and red clay soil break fences in predictable ways. We repair them so the same thing doesn’t happen again next spring.
-
We Fix the Cause, Not Just the Broken Board
Loose boards and a wavy top line are usually symptoms of posts that have rotted, heaved or were set too shallow. We check every post in the damaged run and fix the frame first.
-
Straight Answers on Repair or Replace
If a repair will only buy you a season, we’ll say so. When it’s close, your quote shows both options side by side.
-
Repairs That Leave the Fence Stronger
Replacement posts are 2-3/8″ galvanized steel, set 24–36 inches deep in concrete on a 6-foot fence, with your rails bracketed to them. They won’t rot at the ground line.
-
Photos and Paperwork When You Need Them
For storm claims we document the damage and give you an itemized estimate for your insurer. If your HOA has to approve the repair, we’ll help with what the board asks for.
Services
Fence Repair Services in Norman, OK
We repair every common fence type in the Norman area, whether we built it or someone else did. Here’s what usually fails on each one and how we fix it.
-
Wood Fence Repair
We replace split, warped and missing pickets, cracked rails and rotted bottom boards in cedar or pine to match, using ring-shank or galvanized fasteners. A treated kickboard keeps new boards off the soil.
-
Fence Post Replacement
One rotted or snapped post can pull a whole run out of line. We break out the old footing, set a new galvanized steel post in concrete and bracket the rails to it. We don’t brace rotten posts: a brace only moves the weak point. More on fence post repair.
-
Leaning Fence Straightening
A lean in one spot usually means a failed post or two; a fence that waves along its whole length has a footing problem. We reset or replace the posts that moved and pull the line straight and plumb.
-
Vinyl Fence Repair
Hail, mowers and falling limbs crack vinyl, and summer heat can pop rails out of their posts. Most vinyl fences are built from separate pieces, so we replace only the damaged ones in the same profile and color where they’re still made.
-
Chain Link Fence Repair
We replace bent top rails, re-stretch sagging fabric and splice in new fabric where it’s torn, on galvanized or black vinyl-coated chain link. Leaning corner and gate posts get reset in concrete, since they hold the tension for the whole run.
-
Wrought Iron & Ornamental Steel Repair
We straighten or replace bent pickets, reattach sections that have pulled loose and reset leaning posts. Rust is cleaned to bare metal, primed and painted so it stops spreading.
-
Gate Repair
For gates that sag, drag or won’t latch, we reset the hinge post, square the frame with an anti-sag brace or steel frame and fit new hinges and latches, including self-closing hardware for pool gates. More on gate repair.
-
Storm & Wind Damage Repair
We rebuild flattened sections, replace blown-out boards and panels, reset posts that gave way and repair fences hit by falling trees and limbs. More on storm damage fence repair.
Repair or replace
Should You Repair or Replace Your Fence?
A repair is usually the better value when the problem is local. Replacement wins when the whole fence is wearing out at once.
When a Repair Makes Sense
- The damage is limited to one section, a few posts or a gate.
- Most of the posts are still solid and the line is mostly straight.
- The fence is well within its expected life: about 10–15 years for pine, 15–20 for cedar and 20–30 for vinyl in Oklahoma.
- Matching boards, panels or parts are still available.
When Replacement Is the Better Value
- Posts are rotted or leaning along much of the fence. Once roughly a third have failed, the rest usually aren’t far behind.
- Boards are cracked and brittle across the whole fence.
- The fence is near or past the end of its expected life.
- You want a different height, material or layout, or the fence no longer meets City of Norman or HOA rules.
Not sure which side your fence is on? We’ll quote both at your free estimate and walk you through the difference.
Cost
What Affects the Cost of Fence Repair?
Every repair is different, so we price it after we’ve seen it. Your written quote lists each of these as its own line.
Get a free repair estimate- How many posts need replacing
- Usually the biggest factor: each one means breaking out an old footing and pouring a new one.
- How much fence is damaged
- One section is a short job; a long leaning run takes more material and time.
- Material and matching
- Cedar, pine, vinyl and steel cost differently, and discontinued vinyl or custom iron parts may need a special order.
- Gates and hardware
- Rebuilding a gate frame, resetting a gate post or adding pool-gate hardware.
- Access and ground
- Tight side yards, slopes, rock, roots and buried utilities slow the digging.
- Cleanup and finishing
- Haul-away of broken boards and old concrete, and staining new boards to blend in.
Timeline
How Long Does Fence Repair Take?
Most fence repairs are much quicker than a new fence. Matching parts and the weather are what stretch them out.
- From your call to the on-site estimate, typically
- 1–3 days
- Most repairs of a few posts or sections
- 1 visit
- Concrete cure before a heavy gate is rehung
- 24–72 h
- Special-order vinyl, aluminum or iron parts
- 1–4 weeks
After big spring wind and hail storms, calls for fence repair jump across Cleveland County. If your fence is down, call early, and tell us if a gap leaves a dog or a pool unsecured.
Process
Our 4-Step Fence Repair Process
-
1. Tell Us What Happened
Call or send the form with what you’re seeing: a leaning run, a broken post, storm damage or a gate that won’t close.
-
2. On-Site Inspection & Quote
We check the damaged section and the posts around it, then give you a written, itemized quote, with a replacement option if it’s close.
-
3. The Repair
We call OKIE811 before digging, set new posts in concrete, rebuild the section with matching material and leave the site clean.
-
4. Final Check
We walk the repair with you, make sure the line is straight and every gate swings and latches, and haul away the debris.
Questions
Fence Repair FAQ — Norman, OK
How do you fix a leaning fence?
First we find out why it's leaning. Usually one or more posts have rotted at the ground line, were set too shallow or have been pushed out of line by Norman's clay soil. We dig out the failed posts and footings, set new galvanized steel posts in concrete, pull the line straight and reattach the rails and boards that are still sound.
Can you replace just one fence post?
Yes. A single broken or rotted post is one of the most common repairs we do. We take the boards off that post, break out the old footing, set a new post in concrete and put the fence back together. If the posts beside it are starting to fail too, we'll show you at the estimate.
Will the repaired section match the rest of my fence?
We match board width, height, style and hardware as closely as we can. New wood is lighter than weathered boards, so a repaired section stands out at first and blends in as it ages, or right away if the fence is stained. For vinyl and ornamental fences, we look for the same profile and color or the closest equivalent.
How can I tell if my wood fence posts are rotting?
Check the base of each post where it meets the soil. Soft, dark or crumbling wood, a post that moves when you push it and a fence that wobbles in the wind all point to rot. If a screwdriver sinks easily into the wood just below the soil line, the post is failing, and the posts around it are usually close behind.
Should I repair my fence before selling my house?
Usually, yes. A leaning fence, a gate that won't latch or missing boards are easy for buyers and inspectors to spot. Fixing the visible problems before listing is often enough; a full replacement only makes sense if the fence is at the end of its life. We can quote both so you can decide.
Free estimate
Get a Free Fence Repair Estimate
Describe the damage and roughly how much of the fence it affects. We’ll call to set a time to look at it, then send a written, itemized quote.